When was the final time the roof of your building was inspected? If it’s been awhile, the roof may have problems lurking that require immediate attention. Some roof problems cause obvious signs such as for example leaks, while others produce subtle signs which are only detectable at first glance. In either case, leaving the problems unaddressed can cost you a small fortune once you finally repair them. If the roof on your building has any of the problems listed below, a company that specializes in commercial roofing should repair them quickly:
Buckled Panels
Roof panels buckle because of weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow underneath the panels, making them loose. As the problem worsens, the panels begin to fall off, often coming off in large sections whenever a storm hits. Buckled panels are perhaps one of the most commonly fixed problems by companies that perform roof repair.
Expended Screw Holes
Expanded screw holes are another problem for panel roofs. Over time, wind and fluctuating temperatures cause the screw holes in panels to widen round the screws that contain the panels in place. This creates a space where water can leak within the panels and soak the roof deck. Once the deck becomes saturated, the problem is costly to fix.
Blistering
Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although Roof Cleaning in Spalding pose an issue, large ones can rupture and allow water to seep under the bitumen. After the blisters form, hot weather typically makes them worse. Because of the humid subtropical climate in a few regions of the united states, commercial roofing frequently experiences blistering.
Ponding Water
Blocked drains and improper sloping could cause water to gather in small ponds on a roof. Repairing a blocked drain is easy, but fixing a sloping problem is more technical. Often, installing a taper insulation system to establish a new slope is the foremost solution. Through the rainy season, resolving ponding water is one of the most common forms of roof repair.
Loose Flashing
Flashing prevents water from seeping in the crevice where in fact the roof abuts to protrusions such as chimneys and vents. As time passes, most flashing must be resealed. If it is not, leaks could cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.
Missing Mortar
Chimneys and high elements of brick walls that have parts of missing mortar may cause leaks. These leaks tend to be recognised incorrectly as leaks in the roof membrane, but a thorough inspection by way of a company that focuses on commercial roofing will reveal the true problem. Most sections of missing mortar can be repaired with basic tuck pointing procedures.
Conclusion
The problems above are a few of the most common reasons for roof repair. When they are corrected early, most problems are cheap to fix, however, not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the best way to ensure problems are detected early.